Can Ford Bronco Be Flat Towed? Complete Guide for RV Owners

Contents in this publication

If we're planning a road trip with a motorhome, having a reliable vehicle to explore our destination can make the experience much more enjoyable. The Ford Bronco is an appealing option because of its off-road capabilities, rugged construction, and versatility. However, before connecting one behind an RV, we need to answer an important question: Can a Ford Bronco be flat towed?

Yes, the full-size Ford Bronco can be flat towed with all four wheels on the ground, provided we follow Ford's recreational towing procedure and correctly activate Neutral Tow mode. This applies to compatible full-size Bronco models with manual and automatic transmissions.

There is one important exception: the Ford Bronco Sport is not approved for recreational flat towing with all four wheels on the ground.

In this guide, we'll explain which Ford Bronco models can be flat towed, how the process works, what equipment we need, and the most common mistakes to avoid when towing a Bronco behind a motorhome.

Can You Flat Tow a Ford Bronco Behind an RV?

The modern Ford Bronco is designed to support recreational flat towing, also known as four-down towing or dinghy towing.

Flat towing means pulling a vehicle behind a motorhome with all four of its wheels touching the road. Instead of using a trailer or tow dolly, we connect the vehicle directly to the RV through an approved towing system.

This is particularly convenient for Bronco owners because it eliminates the need to transport and store a large vehicle trailer.

The full-size Ford Bronco features a four-wheel-drive system with a transfer case that can be placed into a special neutral position. This allows the vehicle to be towed without operating its drivetrain in the normal driving configuration.

However, selecting neutral on the transmission alone is not enough. We must activate the dedicated Neutral Tow feature and confirm that the transfer case has successfully disengaged.

Ford Bronco Flat Towing Compatibility

The following table summarizes the general flat towing compatibility of modern Ford Bronco models.

Ford Bronco ModelCan It Be Flat Towed?
Bronco BaseYes
Bronco Big BendYes
Bronco Black Diamond (earlier model years)Yes
Bronco Outer BanksYes
Bronco BadlandsYes
Bronco Wildtrak (earlier model years)Yes
Bronco Heritage EditionYes
Bronco RaptorYes
Bronco Sport Big BendNo
Bronco Sport Outer BanksNo
Bronco Sport BadlandsNo

For the full-size Bronco, both two-door and four-door configurations support recreational flat towing when equipped and prepared according to Ford's instructions.

Compatibility should always be confirmed using the owner's manual for the exact model year and vehicle configuration.

Why Can the Ford Bronco Be Flat Towed?

The primary reason the Ford Bronco can be flat towed is its four-wheel-drive transfer case.

Unlike many modern SUVs with all-wheel-drive systems that cannot be disconnected for recreational towing, the full-size Bronco has a transfer case with a dedicated neutral setting.

When Neutral Tow mode is activated correctly, the transfer case is placed in a neutral position that allows the vehicle's wheels to rotate while the Bronco is being pulled behind another vehicle.

This design provides several advantages for RV owners:

  • We can tow the Bronco without using a full-size car trailer.
  • Both manual and automatic versions can be compatible.
  • We can bring a capable off-road SUV on camping trips.
  • We avoid the extra storage requirements of a trailer.
  • The vehicle can be prepared for towing using its built-in system.

Nevertheless, correct setup is essential. Flat towing without activating the appropriate mode can cause expensive drivetrain or transmission damage.

How to Flat Tow a Ford Bronco: Step-by-Step Guide

Preparing a Ford Bronco for flat towing requires more than connecting a tow bar. We must follow the manufacturer's procedure to ensure the transmission and transfer case are configured correctly.

The following instructions summarize the process for a modern Ford Bronco with an automatic transmission. The exact procedure can differ by model year, so we should always consult the vehicle's owner's manual before towing.

Step 1: Connect the Bronco to the Motorhome

Before activating Neutral Tow mode, position the Bronco behind the RV on a level, secure surface.

Install the approved tow bar and connect it to the Bronco's compatible base plate system.

We should also attach the safety cables, electrical wiring, and supplemental braking system according to their manufacturers' instructions.

Keep the Bronco secured and prevent unwanted movement while preparing the drivetrain.

Step 2: Select Two-Wheel Drive High (2H)

With the vehicle stationary, switch the ignition to accessory mode without pressing the brake pedal.

Next, press the 2H button on the four-wheel-drive control.

This prepares the system for the neutral towing procedure.

Step 3: Shift the Transmission Into Neutral

Press and hold the brake pedal, then move the automatic transmission selector into Neutral (N).

Keep the brake pedal pressed while completing the next steps.

It is important to understand that transmission neutral and transfer case neutral are different settings.

Simply shifting the automatic transmission into neutral does not make the Bronco ready for recreational towing.

Step 4: Activate Neutral Tow Mode

Using the steering wheel controls, navigate to the instrument cluster settings.

Select the Neutral Tow option and press and hold OK until the system displays a confirmation message.

When the procedure is completed successfully, the instrument cluster should display:

"Neutral Tow Enabled Leave Transmission in Neutral"

This message confirms that the transfer case has entered the appropriate towing configuration.

If the confirmation does not appear, we should not begin towing. Instead, repeat the manufacturer's procedure or seek qualified assistance.

Step 5: Finish Preparing the Bronco

Once Neutral Tow is confirmed, release the brake pedal, leave the transmission in neutral, and switch the vehicle off according to the owner's manual.

The 2026 Bronco automatic-transmission instructions also include additional fuse-handling steps when using a supplemental braking system. For applicable non-Raptor configurations, these involve allowing the vehicle to enter sleep mode and removing specified under-hood fuses in the prescribed order.

These instructions are model-year-specific and should not be improvised. We should not disconnect the battery, and we must follow Ford's procedure for the exact vehicle, particularly when fitting an aftermarket braking system. Ford Service Content+1

Step 6: Perform a Final Safety Inspection

Before driving away, we should verify that:

  • The tow bar is correctly connected and locked.
  • Both safety cables are securely attached.
  • The supplemental braking system operates properly.
  • The lighting system functions as intended.
  • Neutral Tow mode has been confirmed.
  • The parking brake is released for towing.
  • The steering system is in the configuration specified by Ford.

We should also inspect all connections after the first few miles and periodically throughout the journey.

Can You Flat Tow a Ford Bronco With an Automatic Transmission?

Yes. The full-size Ford Bronco with an automatic transmission supports recreational flat towing when the transfer case is correctly placed into Neutral Tow mode.

This is particularly useful because many modern automatic SUVs cannot be safely towed with all four wheels on the ground.

The Bronco's four-wheel-drive system makes this possible without requiring a manual transmission.

However, we must distinguish between two important settings.

Transmission Neutral (N): Disengages the transmission's normal drive selection.

Transfer Case Neutral: Places the four-wheel-drive transfer case into the configuration required for recreational flat towing.

Both must be configured as instructed by Ford.

For 2026 automatic Broncos, Ford also specifies periodic engine operation during recreational towing. The towing guide instructs owners to run the engine for a few minutes at the beginning of each day and at intervals no longer than six hours, following its transmission-shifting instructions.

We should follow the full stopping, reconnection, and Neutral Tow procedures whenever the engine needs to be operated.

Can You Flat Tow a Manual Ford Bronco?

Yes. A full-size Ford Bronco equipped with the available seven-speed manual transmission can also be flat towed.

The manual transmission does not eliminate the need to activate the transfer case's neutral towing feature.

Instead, the procedure involves selecting the appropriate four-wheel-drive setting, placing the gearshift in neutral, and using the instrument cluster's Neutral Tow function.

Manual-transmission models also require specific clutch and brake pedal inputs during activation and deactivation.

Because these steps are different from the automatic transmission procedure, we should use the instructions specifically written for the manual version.

Can a Ford Bronco Sport Be Flat Towed?

No. The Ford Bronco Sport is not approved for recreational flat towing with all four wheels on the ground.

This is one of the most important differences between the standard Bronco and Bronco Sport.

Although both vehicles share the Bronco name, they use different mechanical platforms and drivetrain configurations.

The full-size Bronco uses a four-wheel-drive transfer case with a dedicated neutral towing feature.

The Bronco Sport uses a different all-wheel-drive-based drivetrain that does not provide the same recreational flat towing capability.

Trying to flat tow a Bronco Sport behind a motorhome could result in transmission or drivetrain damage.

How Should We Tow a Bronco Sport?

For recreational transport, Ford recommends carrying the Bronco Sport with all four wheels off the ground, such as on a suitable vehicle trailer.

A conventional tow dolly that raises only the front wheels is not an approved recreational towing substitute.

This applies to Bronco Sport trims including Big Bend, Heritage, Outer Banks, and Badlands.

Ford's 2026 RV towing guide confirms that the standard Bronco supports four-wheel-down towing, while the Bronco Sport does not. corporate.ford.com

What Equipment Do You Need to Flat Tow a Ford Bronco?

Even though the Bronco supports flat towing mechanically, we still need specialized equipment to connect it safely to a motorhome.

1. Tow Bar

A tow bar connects the Bronco to the motorhome and allows the vehicle to follow the RV.

We should choose a system rated for the actual weight of our Bronco, including any installed accessories and cargo.

2. Compatible Base Plate

A base plate or manufacturer-approved towing attachment provides the mounting points for the tow bar.

The attachment must be compatible with the Bronco's specific model year, trim, and bumper configuration.

Factory recovery hooks should not automatically be considered suitable tow-bar attachment points.

3. Supplemental Braking System

A supplemental braking system allows the towed Bronco to help slow the combination when the motorhome brakes.

This reduces the braking load on the RV.

Requirements vary by jurisdiction and by the motorhome and towing equipment specifications.

4. Safety Cables

Safety cables provide an additional connection between the Bronco and motorhome.

They should be appropriately rated and installed according to the towing equipment manufacturer's instructions.

5. Towing Light Wiring

The Bronco needs suitable lighting connections so drivers behind the combination can see braking and turn signals.

Depending on the equipment selected, this may involve an aftermarket lighting kit or dedicated towing wiring.

6. Battery Charging Equipment

Some flat towing arrangements can drain the Bronco's battery over time.

A compatible battery charge line may help maintain battery voltage while the motorhome is operating.

The charging arrangement must not interfere with the vehicle's Neutral Tow system.

How Much Does It Cost to Set Up a Ford Bronco for Flat Towing?

The total cost depends on the tow bar manufacturer, braking system, installation complexity, and whether we already own compatible equipment.

Here are broad estimates for a professionally equipped setup in the United States.

EquipmentEstimated Cost (USD)
Tow bar$600–$1,500
Base plate and mounting hardware$400–$900
Supplemental braking system$900–$1,800
Lighting and wiring$100–$350
Safety cables and accessories$100–$250
Installation labor$500–$1,200
Estimated total$2,600–$6,000

These are approximate planning ranges rather than verified installation quotes. Final pricing can vary significantly.

Although the initial investment may be considerable, flat towing can be more convenient than transporting a Bronco on a large trailer.

Ford Bronco Flat Towing Weight: Can Your RV Handle It?

Before flat towing a Ford Bronco, we need to confirm that our motorhome can safely pull the vehicle's weight.

The full-size Bronco is substantially heavier than many traditional dinghy towing vehicles.

Depending on the body style, engine, drivetrain, and equipment, a modern Bronco may weigh approximately 4,300 to more than 5,700 pounds.

A two-door model is generally lighter than a comparable four-door configuration, while the Bronco Raptor is among the heaviest versions.

We should verify the actual weight of our vehicle rather than relying on a general estimate.

Check the Motorhome's Towing Capacity

Motorhomes have different towing limits.

For example, some RVs have a 5,000-pound-rated towing system, while others may be rated for more.

However, a hitch rating alone does not determine how much weight the motorhome can actually tow.

We must also consider the RV manufacturer's towing capacity, gross combined weight rating, hitch specifications, and actual loaded motorhome weight.

A heavily equipped Bronco could exceed the towing capabilities of some smaller Class C motorhomes.

Important: The Bronco's own trailer towing capacity is not the same as its weight when being flat towed behind an RV.

How Fast Can You Flat Tow a Ford Bronco?

The allowable flat towing speed depends on the specific vehicle instructions, towing equipment ratings, road conditions, and applicable traffic laws.

We should never assume that every Bronco model year has the same towing speed restrictions.

For recreational towing, follow the limits given for the exact Bronco and towing setup.

There is also an important difference between recreational towing and emergency towing.

For example, Ford's 2026 Bronco manual specifies emergency towing limits of 35 mph and 50 miles when towing an inoperable vehicle under its emergency procedure.

These emergency restrictions should not be confused with the normal recreational Neutral Tow procedure.

When towing behind an RV, we should maintain a conservative speed, avoid abrupt maneuvers, and allow additional stopping distance.

Common Ford Bronco Flat Towing Problems

Although the Bronco is designed for recreational flat towing, problems can occur when the setup is incorrect.

Neutral Tow Mode Does Not Activate

If the system does not enter Neutral Tow mode, possible explanations include:

  • The transmission is not in the required position.
  • The brake or clutch pedal procedure was not completed correctly.
  • The correct four-wheel-drive setting was not selected.
  • The vehicle has a low battery voltage.
  • The transfer case has not completed its shift.

If the confirmation message does not appear, we should not start towing.

Battery Drains During Towing

Depending on the braking equipment and electrical configuration, battery drain can become an issue during longer trips.

Maintaining the correct electrical setup is important because a low battery can affect the vehicle's towing system.

A properly installed charge line and adherence to Ford's electrical instructions can help reduce problems.

Steering Does Not Follow Correctly

The front wheels must be able to steer properly while the Bronco follows the RV.

Incorrect towing preparation, incompatible equipment, or problems with the steering system may affect tracking.

Any binding, unusual tire behavior, or steering resistance should be investigated before continuing.

Unusual Noises During Towing

Some mechanical sounds are normal when the transfer case shifts into or out of Neutral Tow mode.

However, continuous grinding, severe vibration, dragging, or other unusual noises while towing are not normal.

If these occur, stop safely and inspect the system.

Ford Bronco Flat Towing Mistakes to Avoid

Even experienced RV owners can make mistakes when preparing a vehicle for towing.

Here are some of the most important ones to avoid.

Forgetting to Activate Transfer Case Neutral

Selecting neutral on the transmission is not sufficient.

The Bronco's transfer case must be placed into its dedicated recreational towing configuration.

Failure to do this can damage drivetrain components.

Disconnecting the Battery

Disconnecting the battery may interfere with proper transfer case operation.

Ford specifically warns against disconnecting it during recreational towing.

We should use an approved electrical setup instead.

Using Recovery Hooks as Tow Bar Mounts

Off-road recovery hooks and recreational towing attachments have different purposes.

A recovery hook may be designed to help extract a stuck vehicle, but that does not mean it is approved for continuous towing behind a motorhome.

Use suitable attachment points and a compatible towing system.

Ignoring Tire Pressure

Incorrect tire pressure can increase heat buildup and tire wear.

Before a long RV journey, check the Bronco's tire pressure against the vehicle's recommended specifications.

We should also inspect tread condition and look for tire damage.

Forgetting to Disengage Neutral Tow Mode

Once we arrive at our destination, we need to follow Ford's procedure to return the transfer case to its normal driving position.

We should not simply shift into Drive and assume the vehicle is ready.

The correct confirmation is that Neutral Tow has been disabled and the transfer case has returned to its driving mode.

Is the Ford Bronco a Good Vehicle to Flat Tow Behind a Motorhome?

For RV owners who enjoy outdoor activities, the Ford Bronco can be an excellent choice.

Its combination of off-road capabilities and four-down towing compatibility makes it attractive for travelers who want more than a conventional passenger car.

Advantages of Flat Towing a Bronco

One significant advantage is the ability to bring a capable adventure vehicle without transporting it on a separate trailer.

Once we reach a campsite, we can disconnect the Bronco and use it for sightseeing, grocery shopping, mountain trails, or exploring nearby destinations.

The Bronco also offers removable roof and door configurations, generous ground clearance, and available off-road equipment.

Disadvantages of Flat Towing a Bronco

Despite its versatility, the Bronco is not necessarily the ideal towed vehicle for every motorhome owner.

The main disadvantage is weight.

Some motorhomes may not have sufficient capacity to safely tow a heavily equipped four-door Bronco.

We also need to consider the cost of towing equipment, additional maintenance, the correct electrical setup, and the time required to prepare the vehicle.

For travelers who prioritize a lighter vehicle, a smaller flat-tow-approved model may be more practical.

Which Ford Bronco Is Best for Flat Towing?

If our primary goal is to tow a Bronco behind a motorhome, a relatively lightweight two-door configuration can be a sensible choice.

The two-door Bronco generally weighs less than a similarly equipped four-door version, which can make it easier to stay within a motorhome's towing limits.

However, the best choice depends on how we intend to use the vehicle.

A four-door Bronco is more practical for families and passengers, while a Badlands model offers additional off-road capability.

The Bronco Raptor provides impressive performance but its higher weight makes motorhome towing capacity especially important.

For many RV travelers, a standard Bronco with a less heavily equipped configuration offers a useful balance between capability, weight, and everyday usability.

Frequently Asked Questions About Ford Bronco Flat Towing

1. Can a 2026 Ford Bronco Be Flat Towed?

Yes. The 2026 full-size Ford Bronco can be flat towed with all four wheels on the ground when its transfer case is placed into Neutral Tow mode and the manufacturer's recreational towing instructions are followed. This includes compatible manual and automatic transmission configurations.

2. Can You Flat Tow a Ford Bronco Raptor?

Yes. The full-size Ford Bronco Raptor supports recreational flat towing when properly prepared. However, because the Raptor is heavier than many standard Bronco configurations, we must make sure the motorhome has sufficient towing capacity and use the Raptor-specific instructions.

3. Can You Flat Tow a Ford Bronco Without Disconnecting the Driveshaft?

Yes. The modern full-size Bronco is designed to support flat towing through its transfer case Neutral Tow system. We do not normally need to disconnect the driveshaft when following the approved recreational towing procedure.

4. Does Flat Towing a Ford Bronco Add Miles to the Odometer?

Under normal recreational flat towing conditions, with the vehicle switched off and correctly configured, miles traveled behind the motorhome generally should not be recorded as driven odometer mileage. However, the tires, wheel bearings, suspension, and other rolling components still experience wear.

5. Can You Flat Tow a Ford Bronco With All Four Wheels Down?

Yes, provided it is the full-size Bronco rather than the Bronco Sport and the appropriate Neutral Tow procedure has been completed. Both two-door and four-door full-size models can be compatible. Always confirm the vehicle-specific requirements before towing.

Conclusion: Can a Ford Bronco Be Flat Towed?

Yes, the full-size Ford Bronco is one of the SUVs that can be recreationally flat towed behind a motorhome. Its four-wheel-drive transfer case and dedicated Neutral Tow feature allow compatible manual and automatic models to travel with all four wheels on the ground.

However, proper preparation is essential. We must activate the correct towing mode, verify the instrument cluster confirmation, use approved towing equipment, and ensure our motorhome can safely handle the Bronco's weight.

We should also remember that the Ford Bronco Sport is not approved for four-down recreational towing, despite sharing a similar name and rugged appearance.

For those of us who enjoy RV travel, camping, and off-road adventures, the full-size Ford Bronco offers an appealing combination of versatility and towing compatibility. With the right equipment and careful attention to Ford's instructions, it can be a practical companion for long-distance motorhome trips.

If you want to see other articles similar to Can Ford Bronco Be Flat Towed? Complete Guide for RV Owners you can visit the Tips category.

Related Topics

Leave a Reply

Your email address will not be published. Required fields are marked *

Go up